An electrical engineer designs, develops, tests and supervises the electrical systems in power networks, buildings, machines and products, and makes sure they meet code and work safely. Below is a copy-ready electrical engineer job description template, variants for power, building (MEP), controls and electronics roles, current pay data, and an interview scorecard you can use this week.
Every pay figure on this page comes from the Bureau of Labor Statistics or from live job postings we pulled in November 2026.
Key takeaways
- The BLS median pay for electrical engineers was $120,630 in May 2025, with the middle half earning $92,830 to $152,950.
- Across 21 live postings with pay, the median posted range was $80,310 to $118,650. Experienced-level ads topped out at a median $125,000, close to the BLS 75th percentile.
- Name the specialty in the title. “Electrical Engineer” alone attracts power, building, controls and electronics candidates who are not interchangeable.
- Say whether the role needs a PE license, or EIT now with PE later. It is the biggest single filter in power and building roles.
- Test real design judgment in the interview: a one-line diagram review, a short-circuit or load calculation, or a schematic markup.
What does an electrical engineer do?
Electrical engineers turn requirements into drawings, calculations and specifications, then support construction, manufacturing or testing until the system works. Day to day that means sizing equipment and conductors, running load-flow, short-circuit and arc-flash studies, designing panels and power distribution, writing specifications, reviewing vendor submittals, and checking work in the field.
The job title covers very different work, and the specialty matters more than the degree. Decide which of these you are hiring for before you write the posting.
| Type | What they do | Where they work |
|---|---|---|
| Power / utility | Transmission, distribution and substation design; protection and relay settings; interconnection studies | Utilities, engineering firms, renewables developers, data centers |
| Building / MEP | Power distribution, lighting, fire alarm and low-voltage design for buildings to the National Electrical Code | Consulting engineering firms, design-build contractors |
| Controls / automation | PLC and panel design, motor control, instrumentation and machine wiring | Manufacturers, OEMs, system integrators |
| Electronics / hardware | Circuit and PCB design, embedded power electronics, test and validation | Product companies, aerospace, defense, medical devices |
| Industrial / plant | Plant power systems, reliability, upgrades and maintenance support | Refineries, chemical plants, mills, factories |
Electrical Engineer job description template
Copy this into your ATS and replace everything in [brackets]. Pay, location, licensing and travel sit at the top because those are the first things engineers check before they read the rest.
Electrical Engineer
Location: [City, State] ([On-site / Hybrid]) | Pay: $[95,000]–$[135,000] | License: [PE preferred / EIT required] | Travel: [0–15% to project sites] | Type: Full-time
About the role
[Company] is hiring an Electrical Engineer to design and support [power distribution / building electrical / industrial power and controls] systems for [type of projects or products]. You will own designs from calculations through drawings and specifications, support construction or production, and work closely with mechanical, controls and project management teams.
What you will do
- Design electrical systems for [projects/products], including power distribution, grounding, lighting and [controls / protection]
- Run load, voltage drop, short-circuit, coordination and arc-flash calculations using [ETAP / SKM / EasyPower]
- Produce and check drawings, one-line diagrams, panel schedules and specifications in [AutoCAD Electrical / Revit / EPLAN]
- Select and specify equipment such as switchgear, transformers, generators, UPS, motors and drives
- Review vendor submittals and shop drawings, answer RFIs, and support construction, commissioning and startup
- Make sure designs meet the NEC, NFPA 70E, IEEE standards, local codes and [utility / client] requirements
- Visit [sites / plants] for surveys, inspections and troubleshooting
- Coordinate with mechanical, structural, controls and project management teams to keep work on schedule and budget
What you bring
- Bachelor’s degree in electrical engineering from an ABET-accredited program
- [2–5+] years of electrical design experience in [power / buildings / industrial]
- EIT certification, or the ability to pass the FE exam within [12] months
- Working knowledge of the NEC and relevant IEEE standards
- Experience with [AutoCAD / Revit / ETAP / SKM] or similar tools
- Clear written and verbal communication with clients, contractors and other engineers
Nice to have
- Professional Engineer (PE) license in [state], or the ability to obtain one
- Experience with [medium-voltage design / protective relaying / data center power / PLC panels]
- Field commissioning or startup experience
- Familiarity with [NFPA 70E arc-flash programs / utility interconnection / UL 508A panels]
Pay and benefits
The pay range for this role is $[X]–$[Y], based on experience, licensure and location. Benefits include [health, dental, vision, 401(k) match, PTO, PE exam and license renewal support, professional development].
[Company] is an equal opportunity employer. [Add your standard EEO and accommodation statement.]
Before you post: Colorado, California, Washington, New York, Illinois and several other states require a good-faith pay range in job postings, and that usually applies to remote roles open to workers in those states.
Template variants: swap these lines for your specialty
“Electrical Engineer” covers very different jobs. Pick the variant closest to yours and replace the matching bullets in the template above.
1. Power, utility and substation engineer
For utilities, transmission and distribution work, and renewables or data center power. Replace the design bullets with:
- Design substations, distribution feeders and medium- or high-voltage equipment layouts
- Develop protection schemes and relay settings, and run coordination and fault studies
- Prepare interconnection and load-flow studies and support utility and NERC requirements
Many of these roles are tied to the grid build-out tracked on our US power grid projects map. PE licensure is common, and power engineers often ask about on-call duties, so state yours.
2. Building and MEP electrical engineer
For consulting firms and design-build contractors. Replace the design bullets with:
- Design power, lighting, fire alarm and low-voltage systems for [commercial / healthcare / education / mission-critical] buildings
- Produce construction documents in Revit and coordinate with mechanical and plumbing designers in the BIM model
- Perform lighting and energy code calculations and support permitting and construction administration
State the building types and project size. A hospital or data center designer is a different hire from a retail fit-out designer.
3. Controls and automation electrical engineer
For manufacturers, OEMs and integrators. Replace the design bullets with:
- Design control panels, motor control circuits and machine wiring to UL 508A and NFPA 79
- Specify PLCs, drives, sensors and safety devices, and support programming and commissioning
- Support factory and site acceptance testing and troubleshoot equipment on the floor
If programming is a big part of the job, use our controls engineer hiring guide instead, because the candidate pool and pay benchmark are different.
4. Electronics and hardware design engineer
For product, aerospace and defense companies. Replace the design bullets with:
- Design analog, digital and power circuits and lay out PCBs in [Altium / Cadence / KiCad]
- Build and test prototypes using oscilloscopes, analyzers and environmental test equipment
- Support compliance testing such as EMC, safety and [DO-160 / MIL-STD / IEC 60601] requirements
BLS tracks electronics engineers separately from electrical engineers, so check our electronics engineer salary page for that benchmark.
Electrical Engineer salary: what range to post
Start with the BLS figures, which cover about 198,750 electrical engineers across all experience levels, then compare them with what employers are posting right now. We pulled 21 US electrical engineer job ads with a stated annual pay range, posted between October 20 and November 18, 2026.
| Benchmark | Low | Middle | High |
|---|---|---|---|
| BLS electrical engineers, all levels (25th / median / 75th percentile) | $92,830 | $120,630 | $152,950 |
| Posted pay, entry-level ads (8 postings) | $75,155 | $85,544 | $95,262 |
| Posted pay, experienced ads (13 postings) | $83,300 | $101,325 | $125,000 |
Posted ranges run below the BLS figures, mostly because entry-level and small-firm ads pull the low end down. Experienced-level postings had a median top of range of $125,000, which is just above the BLS median. Engineers compare your range with those benchmarks, so a top of range below about $120,000 for an experienced engineer will read as low.
Specialty moves pay more than anything else. In our sample, a data center electrical engineer role in Austin posted $144,000 to $208,000, while entry-level design roles at small firms started at $50,000 to $70,000. Utility graduate programs posted around $101,000 to $119,000.
For local numbers, see our electrical engineer salary page and the versions for Texas, Dallas-Fort Worth and North Carolina, or compare all disciplines in engineering salary by state.
Required vs. preferred qualifications
Keep the “required” column short. Every extra must-have shrinks your applicant pool, and most of what sits in the preferred column can be learned on the job.
| Area | Required (typical) | Preferred |
|---|---|---|
| Education | BSEE from an ABET-accredited program | MSEE for power systems or electronics roles |
| Licensing | EIT, or able to pass the FE exam within a year | PE license in your state (often required to seal drawings) |
| Codes and standards | NEC (NFPA 70), basic IEEE standards | NFPA 70E, NESC, UL 508A, NFPA 79, IEEE 1584 |
| Software | AutoCAD or AutoCAD Electrical; Excel for calculations | ETAP, SKM, EasyPower, Revit, EPLAN, Altium |
| Analysis | Load, voltage drop and conductor sizing | Short-circuit, coordination, arc-flash, harmonics, load flow |
| Field work | Willing to visit sites | Commissioning, startup and troubleshooting experience |
If engineers will seal drawings, make the PE license required and name the state. Our PE license guide and PE license lookup by state explain the path and how to verify a candidate’s license. For early-career hires, ask for EIT certification or a plan to pass the FE exam.
How to interview an electrical engineer
A resume walk-through will not tell you whether someone can do the work. Pair a technical conversation about real projects with a short practical exercise built from your own work, such as marking up a one-line diagram with mistakes in it, or sizing a feeder and breaker for a given load.
Electrical Engineer interview questions
- Walk me through the last system you designed from start to finish. What calculations did you run and what software did you use?
- How do you size a feeder and its overcurrent protection for a motor load? What NEC articles do you check?
- Tell me about a coordination or arc-flash study you ran. What did you change based on the results?
- Describe a design error you caught, either yours or someone else’s, before it reached construction.
- How do you handle a contractor RFI that shows your design will not work in the field?
- What is the difference between a design that meets code and a design you would sign your name to?
- Which codes and standards apply to the type of work we do, and how do you keep up with code changes?
- For senior roles: how do you review a junior engineer’s drawings, and what do you look for first?
For more general questions, see our list of questions to ask an interviewee.
Electrical Engineer interview scorecard
Score each area from 1 to 4 after every interview. Make offers to candidates who average 3 or more with no 1s.
| Area | 1: Concern | 2: Mixed | 3: Strong | 4: Exceptional |
|---|---|---|---|---|
| Technical fundamentals | Struggles with basic calculations | Knows the math, unsure of the code | Solid calculations and code knowledge | Explains trade-offs and edge cases clearly |
| Design judgment | Cannot explain past design choices | Follows templates without knowing why | Makes and defends sound design choices | Has improved standards or caught major issues |
| Tools and software | No hands-on use of your tools | Basic use | Productive in your core tools | Power user who can train others |
| Field and construction | No field exposure | Limited site visits | Has supported construction or commissioning | Has led startup and solved problems on site |
| Communication | Unclear or defensive | Clear with engineers only | Clear with clients, contractors and engineers | Trusted to lead client meetings |
Electrical Engineer job description mistakes to avoid
- Using one generic title. “Electrical Engineer” with no specialty draws power, building and electronics applicants. Add the specialty in parentheses, such as “Electrical Engineer (Power Distribution).”
- Requiring a PE for a role that does not seal drawings. It shuts out strong EITs. Make it preferred unless the license is truly needed.
- Listing every software package. Name your core tool and one or two others. Engineers learn new software quickly.
- Hiding on-call, site or travel time. Utility and commissioning roles often include outages, nights and travel. Say so in the header.
- Leaving out pay. Electrical engineers get frequent recruiter outreach, and many states now require ranges in postings.
Need help hiring an electrical engineer?
Apollo Technical has recruited engineers since 2010. Our recruiting teams recruit for power, building, controls and industrial electrical roles across Texas, Georgia, the Carolinas, Florida and the Midwest. See our electrical engineering recruiting or talk to our team about your opening.
More engineering job description templates: mechanical engineer, civil engineer, critical facilities engineer and forward deployed engineer. Hiring for a data center? See how to hire data center engineers.
Electrical Engineer job description FAQ
What is an electrical engineer job description?
An electrical engineer job description outlines the duties, qualifications and pay for a role that designs, tests and supports electrical systems such as power distribution, building electrical, controls or electronics. It should name the specialty, the codes and software used, licensing needs (EIT or PE), travel and a pay range.
What are the main duties of an electrical engineer?
Electrical engineers design electrical systems, run calculations such as load, short-circuit and arc-flash studies, produce drawings and specifications, select equipment, review submittals, make sure work meets the NEC and other codes, and support construction, testing and commissioning.
How much should I pay an electrical engineer?
The BLS median for electrical engineers was $120,630 in May 2025, with the middle half earning $92,830 to $152,950. In 21 live postings from October and November 2026, the median posted range was $80,310 to $118,650, with experienced-level ads topping out at a median $125,000.
Does an electrical engineer need a PE license?
Not always. A PE license is needed to seal drawings for public projects and is common in power and building design. Many product, controls and industrial roles do not require one. Early-career engineers usually hold an EIT certification while they work toward the PE.
What software should an electrical engineer know?
It depends on the specialty. Building and power engineers often use AutoCAD, Revit and analysis tools such as ETAP or SKM. Controls engineers use AutoCAD Electrical or EPLAN. Electronics engineers use PCB tools such as Altium or Cadence.
What is the difference between an electrical engineer and an electronics engineer?
Electrical engineers usually work on power generation, distribution and large systems. Electronics engineers work on circuits, boards and devices that use small amounts of power. BLS reports them as separate occupations with different pay.
Methodology: BLS pay figures are national May 2025 Occupational Employment and Wage Statistics estimates for Electrical Engineers (SOC 17-2071), covering all experience levels. Posted pay comes from 21 unique US job postings titled “electrical engineer” (and close variants) posted October 20 to November 18, 2026, on employer job boards, Indeed and Glassdoor that listed an annual pay range. Hourly, part-time and multi-discipline postings were excluded. Entry-level means the title or posting said entry level, junior, EIT, graduate, I or 0–3 years.